IntelliDose by AutoGrow

Automatically manage your nutrient and pH levels, set remote alarms and data log your progress with one simple controller. The IntelliDose by AutoGrow sets the industry standard for a small commercial auto-dosing.

Dose up to a 9 part blend (nutrients, additives, pH adjuster) while maintaining your preset EC and pH settings.

The Intellidose controls one reservoir.

Why IntelliDose?

• You can access your control system remotely through IntelliGrow
• Dose up to 8 nutrient parts
• Run up to 4 irrigation stations

The IntelliDose Kit includes:

• IntelliDose controller
• EC probe
• pH electrode
• Sample pot with all fittings
• Calibration solutions (to get you started)
• 3 x 120ml/min Peri Pump (optional – select upon purchase)
• 24V DC 2.5A power supply with NZ/AUS, US, UK or EU Plug
• 3m USB cable
• Mounting hardware
• Instruction manual

Features:

• Controls all growing methods – NFT, DFT/DWC, soil, media, drip, and aeroponics
• Measure nutrients in EC/CF/TDS (500/640/700 scale)
• Lower or raise pH
• Able to set different EC for day and night
• Able to lower EC by adding water
• Receive SMS alerts
• Irrigation pump outputs
• Fail-safe dosing shut offs

Tech Specs:

• 9 outputs 24VDC (or same voltage as supplied by plug pack)
• Nutrient measurement units EC, CF or TDS (500/640/700)
• Measured range 0.00 to 9.99EC, 0.1 to 99.99CF, 0 to 7000PPM
• Nutrient resolution to .01mS/cm, 0.1CF
• Nutrient measurement accuracy +/-0.1EC, 1.0CF or 10PPM (temperature compensated)
• Nutrient dosing range 0.00 to 5.99EC, 0.1 to 59.9CF, 0 to 4200PPM
• pH resolution and accuracy – 0.1pH
• pH measurement range 2pH to 12pH

• Nutrient and pH dosing times settable from 0 minutes to 254 minutes

Note: In order to connect the Intellidose to the internet you will need to purchase an IntelliLink (purchased separately in the store) and IntelliGrow subscription. Register for subscription here after hardware purchase: https://autogrow.com/our-products-solutions/intelligrow

This service is provided by Autogrow.